Roll Bars & Bumpers

Pictured below is a Scout II that went through a $20,000 build. Thankfully the owner put the real money into building a proper roll cage. About 3 months after the build was completed, he lent the truck to a friend who took it out onto the freeway. The inexperienced driver hit a groove in the roadway at 60 MPH and the Scout flipped and slid for several hundred feet. There was a full investigation and it was determined that the driver would have died if there was no roll cage. He was lucky and walked away from the accident. As a side note, raising the center of gravity increases the chances of rollover. Please consider the lives of loved ones and innocent by-standers when giving your truck the "Macho" lift. This accident happened a few years ago, but I was lucky to get these pictures before the Truck is finally parted out. CLICK on EACH PICTURE to get a full view of the damage~!

Pictured below is a pair of Scout II’s that were used in the movie “Dreamcatcher” (2003) written by Stephen King and featuring Morgan Freeman. Although this movie is “set” in Maine, USA, it was actually filmed in British Columbia, Canada. I believe 5 Scouts were used. One was taken back to California to be placed in a museum. The remaining Scouts are still located in B.C. and the pictures below show the damage they sustained to make the film. One Scout had a special rack installed on the roof for the movie camera. A couple of the Scouts had protective roll cages built to protect the actors. All of the Scouts were painted the same colour (faded red body with white top) and a russet interior. Guess which of the two Scouts below has a roll cage? Both were rolled~! Interesting to note that the bodies were sprayed to simulate “dirt” with a concrete looking wash. This can still be seen on the bodies. Want to own a piece of history? Main point here...is the roll cage! CLICK on EACH PICTURE~! Link to info on the movie(click back button to return to ScoutpluSS!!) : http://imcdb.org/vehicle_22352-International-Harvester-Scout-II-1977.html

New & Used Roll Bars (Show Bars) for SALE~!

Caution must be used here. The term "Roll Bar" is applied to a protective device that attaches to the frame or superstructure of a vehicle. They are usually professionally designed or engineered. ScoutpluSS!! sells "Show Bars" which may not provide the protection required. Do what you can to prevent injuries and death. You may also want to consider Seatbelts & Helmets! All new bars come in raw steel (not painted).

PP028 Scout II MID Show Bar, Built to OEM Factory Original Construction Specs! Has 2" Tubing, includes all Hardware and is of 5 piece design for easy shipping~! This mounts directly behind the front seat(s) on the "step" to the cargo area and also to the rear wheel wells. $375

1131, Scout II Padding kit for the above Scout II (mid) Show Bar (PP028). The padding covers all of the bars. If you don't pay attention or are on extremely rough trails, those tubes can hurt the noggin. $159

PP157, Scout II Rear Family Bar. This has to be welded to the Scout II Mid Bar and then attaches to the floor behind the back seat. It uses 2" tubing and is a 5 piece knock down design for easy shipping. (sorry, no picture) $459

PP081, Scout TRAVELER MID Show Bar, Built to OEM Factory Original Construction Specs! Has 2" Tubing, includes all Hardware and is of 5 piece design for easy shipping~! This mounts directly behind the front seat(s) on the "step" to the cargo area and also to the rear wheel wells. $399ea

PP133, Scout TRAVELER REAR Family Bar, This has to be welded to the Traveler Mid Bar and then it attaches to the floor behind the back seat. It uses 2" tubing and is a 5 piece knock down design for easy shipping. The FAMILY BAR is shown WITH the MID BAR, which is NOT included. (If you want BOTH SECTIONS, the price is $900). For the rear section only it is $529

PP082, Scout FRONT Show Bar, Built to OEM Factory Original Construction Specs! Has 2" Tubing, includes all Hardware and is of 5 piece design for easy shipping~! This will cover the section over the dash...to be welded to the Mid Section of either the Scout II OR Traveler Show Bar to make a complete unit. (sorry, no picture) $319

PP083, Terra Show Bar, Built to OEM Factory Original Construction Specs! Has 2" Tubing, includes all Hardware and is of 3 piece design for easy shipping~! This will fit inside the cab of a Terra Top or Scout II Cab Top. (sorry, no picture) $339ea

PP084 Scout 80/800 Show Bar. It mounts behind the front seats on the "wheel wells". It is of 3 piece bolt together design for easier shipping. $295

BUMPERS:

860040R2DP, Scout 80/800 Delux Primered Black Bumper, will work front or rear. $229ea

860040R2SP, Scout 80/800 Standard Primered Bumper $169

549322C91, Scout II, Terra & Traveler Bumper Guards, used condition. Call or email for pricing & pictures.

WARN Winch Bumper. This is in excellent condition and is complete with the fog lights. All the right stuff if you are restoring a period correct Scout. We have many other detailed pictures if required. No dents and never abused, but will need to be wire brushed and painted. This will knock down for shipping. $350